- COMPLETE BOLT-ON ASSEMBLY
- THESE BRACKETS CORRECT THE CASTER WHEN LIFTED FROM 2″ up to 6″
- CORRECTS FRONT CASTER ANGLE AND CONTROL ARM ANGLE TO THE FRAME
- BRACKETS ARE BLACK SATIN POWDER COATED
- HARDWARE INCLUDED
FJ80 FZJ80 Control Arm Drop Brackets Front 2″ inch Manafre 1991, 1992, 1993, 1994, 1995, 1996, 1997
Available on backorder
Available on backorder
Why would this be important?
- Simple, the control arms on an 80 series not only position the axles in relation to the frame, they also transfer acceleration and braking force from the axles to the chassis. This angle or geometry determines how the vehicle reacts under acceleration, cornering, and braking. Trust us, Toyota spent a lot of time, and money, testing and engineering to determine the correct angles and geometry for the 80 series suspension.
Is this perfect for everyone?
- No, if you’re using your 80 series as a “rock buggy” you obviously have other concerns than how the vehicle handles and steers, but for the vast majority of us that use our 80 as a daily driver, suspension geometry determines if our vehicle is a joy to drive or a pain in the rear. These bracket kits are designed to drop the fixed end of the OEM front control arms 2″ inches and bring the caster back to stock alignment and into the center of the designed travel arc. On vehicles with 2″, stock bushings are retained in the control arms. One big advantage of these bracket kits is installation requires no drilling, no cutting, no welding, the control arms can stay attached to the front axle, no press is required for 2″ consequently they are much easier to install than any other caster correction option.
- Please note our FRAB caster brackets are designed for USA version 80 Series Land Cruiser which only where offered with an automatic transmission.
These brackets will not fit on vehicles with manual transmissions.
|Dimensions||19 × 10 × 10 in|
2 INCH Front Control Arm drop Brackets 90-97 FJ/ZJ80, 3 INCH Front Control Arm drop Brackets 90-97 FJ/ZJ80, 4 INCH Front Control Arm drop Brackets 90-97 FJ/ZJ80, 5 INCH KIT Brackets w/ OME Caster Bushings, 6 INCH KIT Brackets w/OME Caster Bushings, 4 Front Control Arm Bushings, Control Arms to Axle, 6 Front Control Arm Bushings, Control Arms to Axle and Frame